Hitec Telemetry System Manuel d'utilisateur télécharger pdf

2 3

2.4Gz Telemetry Product Installation Guide 2.4Gz Telemetry Product Installation Guide

Beginning with the Ver. 1.07 software Aurora transmitters will be fully capable of advanced 2.4G downlink data telemetry.

When using a combination of sensors and Hitecs micro “Sensor Station”, all of the following functions can be displayed on

the Aurora screen during the ight, and viewed on a PC in real time!

- On-Board Battery Voltage, (this is displayed without the use of sensors when the Auroras SPC function is used).

- Up to four dierent temperatures

- Measure RPM with either magnetic or optical encoders.

- Monitor liquid fuel usage

- Gather GPS data to see speed, altitude and location information

This installation guide will cover the physical installation of the Sensor Stations and sensors in airplanes and helicopters

including the related Aurora software screens and their features.

At the end of this manual is a description of how the HPP-22 PC interface can be used to display in real time, record and

play data collected during a ight.

One of the great features of the Aurora transmitter, Spectra 2.4 module and the Optima receivers is their ability to “be

up-dated” with new software. The HTS-SS sensor station now joins the product line with its software up-date capability.

To take advantage of the sensor telemetry we need to be sure your equipment has the latest software.

Step 1.

Does your Aurora have Software V 1.07 or greater? Check in the Aurora system menu – info menu screen, for your Aurora

software version. If not, You will need to update the Aurora software using the HPP-22 device.

Step 2.

Does your Spectra 2.4 module have Software V 2.00 or greater? If not, You will need to update the module software using

the HPP-22 device.

Step 3.

Does your Optima receiver have Software V 2.00 or greater? If not, You will need to update the Aurora software using the

HPP-22 device.

A key advantage to electric aircraft pilots is knowing the voltage of their on-board motor battery. This is done by using the

Auroras SPC function. When the SPC is connected, the motor battery voltage is shown on the Auroras home screen and in

the Cockpit mode.

Please note the SPC connection directions as found in the Aurora manual.

The voltage of your on-board battery can be viewed in real time on the Aurora’s screen three ways;

1. The rst is on the home screen.

2. The second is to Select the Sensor icon at

the System menu and press Battery.

Nitro Full Combo:

- Includes Sensor Station, two RPM Sensors (Optical & Magnetic), four Temp.

Sensors, GPS and Fuel Sensor

Nitro ORPM Combo:

- Includes Sensor Station, Optical-RPM Sensor & two Temp. Sensors

Nitro MRPM Combo:

- Includes Sensor Station, Magnetic RPM Sensor & two Temp. Sensors

Sensor Station:

- HTS-SS

Optical RPM Sensor:

- HTS-ORPM

Magnetic RPM Sensor:

- HTS-MRPM

Temperature Sensor:

- Includes two Temp Sensors HTS-TEMP

Fuel Level Sensor:

- HTS-FUEL

GPS Sensor:

- HTS-GPS

Contents

Available Telemetry Products:

1) Are You Updated?

2) On-Board Battery Voltage

3) Sensor Station

4) Temperature Sensor

5) RPM Sensor

6) Fuel Level Sensor

7) GPS Sensor

8) HPP-22 Interface

9) Trouble Shooting

10) Product Support

3 - - - - - - - - - -

4 - - - - - - - - - -

5 - - - - - - - - - -

6 - - - - - - - - - -

8 - - - - - - - - - -

9 - - - - - - - - - -

10 - - - - - - - - -

13 - - - - - - - - -

Stock# 55830

Stock# 55831

Stock# 55845

Stock# 55832

Stock# 55833

Stock# 55842

Stock# 55834

Stock# 55835

Stock# 55836

Introduction

1. Are You Updated?

2. On-Board Battery Voltage

HTS-SS HTS-SS

1 2 3 4 5 6

HTS-SS HTS-SS 1

Résumé du contenu

Page 1 - HTS-SS HTS-SS

2 32.4Gz Telemetry Product Installation Guide 2.4Gz Telemetry Product Installation GuideBeginning with the Ver. 1.07 software Aurora transmitters will

Page 2

2. On-Board Battery Voltage4 52.4Gz Telemetry Product Installation Guide 2.4Gz Telemetry Product Installation GuideHTS-SS HTS-SSThe 3rd method is acti

Page 3

Indoor lighting and outdoor lighting variations can aect the readings of the optic sensor.NoteEach magnet has a X mark to identify polarity, please m

Page 4

If power to the aircraft is lost or interrupted prior to the ight, the fuel meter will not operate accurately. De-fuel and start the fueling process

Page 5

10112.4Gz Telemetry Product Installation Guide 2.4Gz Telemetry Product Installation GuideHTS-SS HTS-SS6. Launch the HPP-22 PC program7. Under the Prod

Page 6

10112.4Gz Telemetry Product Installation Guide 2.4Gz Telemetry Product Installation GuideHTS-SS HTS-SS8. HPP-22 PC InterfaceThey must have the HPP-22

Commentaires sur ces manuels

Pas de commentaire

Hitec Telemetry System Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Capteurs Hitec Telemetry System. HITEC Telemetry System User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Capteurs Hitec Telemetry System